IN Brief:
- Galileo Robotics reports deploying its C1-W quadruped for inspection and security patrols at an unnamed logistics park in Poznań, Poland.
- The company says patrol frequency has increased from two manual rounds daily to one robotic patrol every three hours, covering more than 2,000 square metres.
- Published specifications include IP65 protection, a stated −20°C to 55°C operating range and optical, thermal and acoustic sensing; customer identity and independent validation are undisclosed.
Galileo Robotics has deployed its C1-W wheel-legged quadruped robot at a logistics park in Poznań, Poland, for warehouse inspections and security patrols. Working with an unnamed local partner, the company says the machine now undertakes patrols every three hours, compared with two manual inspection rounds a day previously.
The robot records images, thermal readings and acoustic information while travelling through storage aisles and loading areas. Galileo reports more than 400 hours of operation, with the deployment covering over 2,000 square metres of storage and approximately 2,250 metres of shelving. The logistics park operator has not been identified, so the operational results remain manufacturer-reported rather than customer-verified.
The C1-W combines a quadruped body with wheel-legged movement for travelling around industrial premises. Galileo specifies IP65 ingress protection, an operating temperature range of −20°C to 55°C and the ability to negotiate slopes up to 30 degrees. Those values define claimed equipment capabilities; the company has not said which environmental limits or slopes have been encountered during the Poznań deployment.
Autonomous navigation allows the robot to follow an inspection route between storage racks and loading bays without an employee walking every section. A moving sensor platform can obtain views from several points along an aisle, but successful patrols depend on current route mapping and the ability to handle temporary obstructions such as parked vehicles and goods awaiting movement.
Two manual rounds per day left relatively long periods between scheduled checks. Galileo says the new three-hour patrol cycle increases inspection frequency, though it has not supplied the duration of each route, the number of machines in service or whether security staff still carry out additional manual inspections. The published comparison therefore measures scheduled patrol cadence, rather than a verified reduction in total labour hours.
The sensing channels serve different tasks. Optical cameras can document visible obstructions or changes in the position of equipment; thermal sensors record temperature differences that may point towards developing faults; and microphones capture sound patterns for comparison with normal activity. Each observation requires interpretation before it can be treated as a safety or security incident.
The warehouse environment changes continuously as forklift trucks, workers and pallets move between aisles. An inspection robot must navigate those movements without interfering with normal operations, while identifying conditions that merit an alert. Galileo claims its processing software can identify risks in real time but has not published detection accuracy, false-positive rates or a site-specific independent safety assessment.
Galileo also reports that responses to anomalies have fallen from hours to minutes. The company has not supplied a measurement period, a definition of the incidents counted or independent corroboration. Alert transmission and human response are separate steps: a notification may reach a control point rapidly, while investigation and any corrective action still depend on staff availability and established procedures.
Patrol data is reportedly transmitted to a central platform for retrieval and later analysis. Time-stamped sensor records may allow operators to compare conditions between rounds and reconstruct an incident, provided access rights, sensor locations and retention rules are configured properly. The supplier has not identified the software architecture, cybersecurity arrangements or integration with the customer’s existing warehouse systems.
The C1-W is conducting environmental inspection rather than the goods-moving work assigned to autonomous mobile robots or pallet-handling machines. It is not reported to pick stock, transport pallets or replenish shelves at Poznań. Inspection coverage, repeatability and useful alerts are therefore more relevant measures for this deployment than completed orders or warehouse throughput.
Wheel-legged movement may help the robot cross changes in floor level and access areas outside the reach of stationary cameras, subject to the route’s actual geometry. Galileo’s published product specification refers to slope-climbing ability, although no site survey or comparative test against a conventional wheeled inspection platform has been released.
Robots operating near employees and handling equipment need procedures for stopping, yielding and rerouting when paths become occupied. Battery charging, maintenance, connectivity loss and operator override also have to be managed within the site’s working rules. Galileo has not disclosed the arrangements used at this warehouse, despite reporting more than 400 hours of operation.
Galileo intends to reproduce the approach at other European warehouse sites with local partners. No additional customer contracts, installation dates or service-level commitments have been identified in the 16 November disclosure.
The reported increase from two daily checks to patrols every three hours gives the Poznań operator more frequent observations of its working environment. Whether that produces consistently faster incident handling will depend on alert accuracy, response procedures and performance across normal warehouse shifts. The company has not yet published independent customer results from the installation.



